Projector RGB Flood Light
Projector RGB Flood Light The ,RGB ,RGBW flood light wall washers,with unique housing design and Utility model patented, Can be used as landscanp light,architectural lighting . The LEDs are Anti-Glare optics,highlighting a 95 percent power factor. 15˚,25˚,40˚,60˚90°, beam angle optional. 1....
Projector RGB Flood LightThe ,RGB ,RGBW flood light wall washers,with unique housing design and Utility model patented,
Can be used as landscanp light,architectural lighting .
The LEDs are Anti-Glare optics,highlighting a 95 percent power factor.
15˚,25˚,40˚,60˚90°, beam angle optional.
|Input Voltage||100-277V, DC24V|
|Light Color||RGB,RGBW, RGBA, B/R/G only|
|Control Method||DMX512 control, Wireless control, Wifi control|
|Housing Color||White or Black|
|IP Rating||IP66, IP67|
|Working Temperature||-20 ~ +40|
|Warranty||3 or 5 years|
2, 50-1000w Available.
1.Exhibition halls, Show rooms, garden, buildings, park.
2..Brand stores, Specialty shops, Department stores.
3.Shopping malls, Commercial buildings.
4.Residential/Institution Buildings Supermarkets
DMX 512 Parallel Connection Diagram
DMX Series Connnection Diagram
It is spend more than 8 hours on aging room.
If the RGB wall washers are after more than 8 hours of aging test, the wall washer will be better than It Without aging test.
At present, one of the biggest technical problems of LED lighting fixtures is the heat dissipation problem. The LED heat supply and electrolytic capacitors have become the short-term development of LED lighting fixtures, and the cause of premature aging of LED light sources.
Only by exposing the heat as soon as possible can the cavity temperature in the LED lamp be effectively reduced, so as to protect the power source from working in a long-lasting high temperature environment, in order to avoid premature aging of the LED light source due to long-term high temperature operation.
Because the LED light source itself does not have infrared rays or ultraviolet rays, the LED light source itself has no radiation heat dissipation function, and the heat dissipation path of the LED lighting fixture can only derive heat through a heat sink closely combined with the LED lamp bead. The heat sink must have the functions of heat conduction, heat convection, and heat radiation.
Any heat-sink, in addition to being able to quickly transfer heat from the heat source to the surface of the heat-sink, the most important thing is to rely on convection and radiation to dissipate heat into the air. Thermal conduction only solves the heat transfer path, and thermal convection is the main function of the heat sink. The heat dissipation performance is mainly determined by the heat dissipation area, shape, and natural convection strength. Thermal radiation is only an auxiliary function. In general, if the distance from the heat source to the surface of the heat sink is less than 5 mm, then as long as the thermal conductivity of the material is greater than 5, the heat can be derived, and the rest of the heat must be dominated by heat convection.
We are professional high Power LED lighting designer and manufacture , Our Main products have DLC ETL LM-79 CE ROHS certificated LED Flood light , LED Shoebox light , LED Canopy light, and IES Files available .
Q1:what is the warranty for the lamps.
A1 For the lamps we have 3year warranty and 2 year warranty.
If any quality problems on our side occured in this period,we will take
on the shipping cost and replacement.
Q2: What is colour temperature?
A2: what is your colour temperature.
we offer three colour temperature
cool white: 5000k-6500k
Q3:What is CRI?
A3:CRI is a figure whcih feedback the real objects color higher cost
for LED tubes.the CRI is mostly 70-75Ra,and 80Ra with highercost bud
there are some suppliers write a high data to attact clients please